6 ''Coupling Collapsible pipe fitting mould

With the rapid development of flaring pipe die industry, the manufacturers of automatic flaring machine grow rapidly. The great demand of users of flaring pipe die also requires the safety standard of operation of flaring pipe die.

So how to use flaring pipe mold correctly? This article focuses on informing the general user of the basic issues they will use to operate the equipment in the future. On this basis, how to achieve safety standards, although the use of automatic puffing machine is relatively simple and convenient to maintain, there are also some matters needing attention in the use of flaring pipe mold, especially whether the use of safety regulations on flaring pipe mold requires the operator to understand:

1. When the flaring pipe mold is energized, it is forbidden for the operator to test or measure the voltage of the DC motor control board and the voltage between the input point of the PROGRAMMABLE logic controller and the ground wire.

2. After using the expander of the flaring pipe mold for a period of time, it is necessary to regularly check whether the connecting parts of the machine are loose, and tighten them if necessary.

3. When using the flaring pipe fitting mold, it is strictly forbidden to move or remove the upper and lower limit blocks of the expander if the height of the automatic expander does not change. If you need a replacement, contact the manufacturer or read the instructions.

4. The turntable of flaring pipe mold should rotate clockwise, not reverse.

5. It is strictly prohibited to stand under the die frame of the automatic puffing machine, that is, under the parts of the membrane system, to pile up any sundries.

6. When the expansion frame starts to work, do not stretch the film into other objects to avoid damaging parts and fingers.

7. Once the power of the expander is grounded, if you need technical problems, you must contact the manufacturer to find a professional. Operators must regularly check electrical and electrical connections, connect and clean electrical cabinets.